Terminal and junction tower series comparison
Contents
Overview
Use this page to help identify UK electricity pylon series by DT, DJT, DT90 and ST (etc) terminal and junction towers. Within each voltage class the tower series are arranged in approximate chronological order of introduction. See the comparisons page for other comparisons. See the series page for the list of known series.
Not all series are covered by this page; coverage is limited to available data. See the project completeness page for details.
Three and four circuit and dual voltage
Double circuit
Double-circuit terminal and junction towers by series.
33 and 66 kV
132 kV
Note that L2 towers were designed for 275 and 380 (or 400) kV and are listed under 400 kV below.
275 kV
400 kV
Note that Balfour Beatty L6 DT looks a lot like the D90.
Single circuit
Single-circuit terminal and junction towers by series.
Single circuit lines
Termination of a complete single-circuit line. For gantry types, see also gantry comparison.
33 and 66 kV
110 kV
132 kV
Special tall towers:
275 kV
Half line, double circuit
Termination of one circuit of a double-circuit line.