10° angle tower series comparison
Contents
Overview
Use this page to help identify UK electricity pylon series by D10 and S10 angle towers. Within each voltage class the tower series are arranged in approximate chronological order of introduction. See the comparisons page for other comparisons. See the series page for the list of known series.
Not all series are covered by this page; coverage is limited to available data. See the project completeness page for details.
Note that not all tower series contain a distinct 10° design; in some cases the 30° tower was used with different foundations.
Double circuit
10° double-circuit angle towers (deviation/tension towers) by series.
33 and 66 kV
132 kV
L4(m) and L7 use 30° towers for 10° angles.
275 kV
L66 uses 30° towers for 10° angles. Note that L2 towers were designed for 275 and 380 (or 400) kV and are listed under 400 kV below.
400 kV
L6 and L8(c) use 30° towers for 10° angles.
Single circuit
10° single-circuit angle towers (deviation/tension towers) by series.